A Hands-On Approach: How to Apply and Remove Your Men's Hair System

A Hands-On Approach: How to Apply and Remove Your Men's Hair System

For many men, hair loss can take a toll on their confidence and self-esteem. Fortunately, advancements in technology have led to the development of men's hair systems that provide a natural and seamless solution to hair loss. Whether you're new to wearing a hair system or looking to improve your application and removal techniques, this comprehensive guide will walk you through the steps of applying and removing your men's hair system with confidence and ease.

The Importance of Proper Application

Before we dive into the step-by-step process of applying and removing your men's hair system, let's understand why proper application is crucial. A well-applied hair system not only ensures a natural appearance but also enhances your comfort and self-assurance.

 man hair system increases self confidence

When done correctly, your hair system should seamlessly blend with your existing hair, giving you the freedom to style and enjoy various activities without worrying about its stability.

Adapting the hair system to your scalp

Trimming the mesh of a man's hair system to adapt it to the shape of your scalp requires careful attention and precision. The mesh, often referred to as the base or foundation, is a crucial element in achieving a natural and comfortable fit.

Here's a step-by-step process to guide you through the process:

Step-by-Step Process

  • Prepare Your Hair System

Ensure your hair system is clean, dry, and securely attached to your scalp using the adhesive method you prefer. The hair should be combed and styled as you would wear it.

  • Evaluate the Fit

    Look closely at the hairline and edges of the hair system where the mesh meets your scalp. Take note of any areas where the mesh might be too long or extend beyond your natural hairline.

    • Section the Hair
      Divide the hair system into smaller sections, such as front, sides, and back. This will help you work methodically and avoid cutting too much in one area.
      • Marking the Mesh (Optional)

      If you're concerned about accidentally cutting too much, you can use a washable pen or marker to lightly mark the areas where you intend to trim. This will serve as a guideline and help you maintain control over the process.

      • Start Trimming

        Begin with the front section, as it's often the most visible part of the hair system. Use the small comb to hold down the hair while you carefully trim the mesh. Use hair-cutting scissors or thinning shears to make precise cuts.

        baber trimming man hair replacement system

        • Trimming Techniques

        When trimming the mesh, use small, controlled cuts to gradually shape it to your scalp's contours. Avoid cutting in a straight line, as this can create a noticeable edge. Instead, use a slight zigzag or jagged cutting motion to achieve a more natural blend.

        • Check in the Mirror

        Frequently check in the mirror to assess your progress. Ensure that the mesh follows your natural hairline and sits comfortably on your scalp.

        • Adjust the Edges

        Pay close attention to the edges of the hair system, such as the temples and nape. Trim these areas carefully, as they contribute to the overall natural appearance.

        • Blend the Base

        As you trim, focus on creating a seamless blend between the mesh and your scalp. The goal is for the mesh to be virtually undetectable when properly aligned with your natural hairline.

        • Spray Bottle with Water (Optional)

        If you encounter resistance while trimming, mist the mesh with a small amount of water using a spray bottle. This can help soften the material slightly, making it easier to cut.

        • Final Assessment

        Once you've trimmed all sections, carefully assess the overall fit and appearance of the hair system. Make any necessary adjustments to ensure a comfortable and natural look.

        man wearing hair replacement system looking at the mirror

        Tips

        Go Slowly: Trimming the mesh requires patience and precision. Take your time to achieve the desired result.

        Practice Caution: It's better to trim a little at a time and gradually adjust as needed. You can't undo excessive trimming.

        Maintain the Shape: The goal is to shape the mesh to your scalp's contours while ensuring it blends seamlessly with your natural hairline.

        Professional Help: If you're uncertain or uncomfortable with cutting the mesh yourself, consider seeking assistance from a professional hair system stylist.

        By following this step-by-step process, you'll be able to trim the mesh of your men's hair system to achieve a comfortable and natural fit that enhances your overall appearance and boosts your confidence.

        Applying Your Men's Hair System

        Step 1: Prepare Your Scalp

        Clean your scalp thoroughly using a gentle shampoo and water. Ensure your scalp is free from oils, dirt, and residue that could affect the adhesion of the hair system.

        Apply a scalp protector or primer to create a barrier between your scalp and the adhesive. This helps protect your skin and promotes better adhesion.

        Step 2: Choose Your Adhesive

        Depending on your preference and the type of hair system you have, choose the adhesive method that suits you best. Options include tape, liquid adhesive, or adhesive spray.

        Cut the adhesive tape to fit the perimeter of your hair system if you're using tape. If you're using liquid adhesive or adhesive spray, follow the manufacturer's instructions for application.

        Step 3: Apply Adhesive

        Gently apply the adhesive to your scalp, following the adhesive method you've chosen. Be cautious not to use too much glue, as it can lead to excess buildup and discomfort.

        Applying glue to install non surgical hair system for man in Torremolinos

        Allow the adhesive to dry slightly until it becomes tacky. This step ensures a secure bond between your scalp and the hair system.

        Step 4: Position Your Hair System

        Align the front edge of the hair system with your natural hairline. Gently press down the front of the hair system to attach it to the adhesive.

        Slowly press down the rest of the hair system, ensuring that it aligns properly with your scalp and natural hair.

        fitting man hair system in torremolinos

        Step 5: Secure and Style

        Once the hair system is in place, gently press along the edges to ensure a secure bond.

        Style your hair system as desired. You can cut, trim, and style the hair to achieve your preferred look.

        Removing Your Men's Hair System

        Step 1: Prepare

        Gently comb or brush the hair system to remove any tangles or knots. This makes the removal process smoother and prevents damage to the hair.

        Put on a pair of disposable gloves to protect your hands during the removal process.

        Step 2: Apply Adhesive Remover

        Apply a small amount of adhesive remover along the edges of the hair system where it's attached to your scalp. Allow the adhesive remover to penetrate and weaken the bond.

        Slowly and gently lift the edges of the hair system using your fingers or a comb, being careful not to pull or tug forcefully.

        Step 3: Remove Hair System

        Once the adhesive has loosened, gently lift the hair system away from your scalp. Take your time to avoid damaging the hair or your skin.

        removing hair replacement system for man in torremolinos

        If you encounter resistance, apply more adhesive remover and wait for it to work before attempting to remove the hair system completely.

        Step 4: Clean and Care

        Clean the hair system by gently removing any adhesive residue using a clean cloth or cotton pad soaked in adhesive remover.

        Wash and condition the hair system according to the manufacturer's instructions. Allow it to air dry on a wig stand or mannequin head.

        Tips for a Seamless Experience

        • Practice Makes Perfect: Applying and removing your hair system may take some practice. Don't be discouraged if it's not perfect on your first try.
        • Be Patient: Take your time during both the application and removal processes to ensure a comfortable and damage-free experience.
        • Adhesive Allergies: Before using any adhesive products, perform a patch test to check for any allergic reactions.
        • Follow Instructions: Always follow the manufacturer's instructions for the adhesive, adhesive remover, and hair system care to maintain the quality of your hair system.
        • Seek Professional Help: If you're unsure about the process or encounter difficulties, consider seeking assistance from a professional hair system stylist. IMH Studio, located in the heart of Benalmadena on the Costa del Sol, stands as a foremost authority in men's hair system installation and upkeep. Conveniently positioned for residents of Torremolinos, Malaga, Fuengirola, and Marbella, we're just a short drive away. Embark on a transformative journey with us — schedule a free consultation today.

        In Conclusion

        Wearing a men's hair system can be a transformative experience, boosting your confidence and allowing you to express your personal style. By following these step-by-step instructions for applying and removing your hair system, you'll be well on your way to achieving a natural and comfortable look that enhances your self-assurance and helps you face each day with renewed confidence. Remember that practice, patience, and proper care are the keys to mastering the hands-on approach to your men's hair system.

        Back to blog

        Leave a comment

        Please note, comments need to be approved before they are published.